Set Lower Stroke Limit Menu - Phoenix Mecano Rk Rose+Krieger Rk Multicontrol Ii Duo Accu/Dc Control Montageanleitung

206
Deactivating stroke limitation
⇨ The upper final position determined or set during the initialization run
3. Select "Deactivate upper stroke limit" (Figure 71).
is applied.
8.5.3.2

Set lower stroke limit menu

The lower stroke limit can be set either during the initialization
run or later using the "Set lower stroke limit" menu.
◼ The drives are in the desired position which is used as the final position.
Prerequisite:
◼ The main menu for the hand switch is displayed.
187
Selecting a menu
Select the menu via "Control" → "Stroke limitation" → "Set lower
1.
stroke limit" (Figure 72).
Assembly instructions for the RK MultiControl II duo accu/DC control
Figure 70 - Activating stroke limitation
Figure 71 - Deactivating stroke limitation
⮱
Section 8.3 on page