Stroke Limitation" Menu; Set Upper Stroke Limit" Menu - Phoenix Mecano Rk Rose+Krieger Rk Multicontrol Ii Duo Accu/Dc Control Montageanleitung

8.5.3
Assembly instructions for the RK MultiControl II duo accu/DC control

"Stroke limitation" menu

8.5.3.1

"Set upper stroke limit" menu

The upper stroke limit can be set either during the initialization
run or later using the "Set upper stroke limit" menu.
◼ The drives are in the desired position which is used as the final position.
Prerequisite:
◼ The main menu for the hand switch is displayed.
187
Selecting a menu
Select the menu via "Control" → "Stroke limitation" → "Set upper
1.
stroke limit" (Figure 69).
Activating stroke limitation
⇨ The current position of the drives is applied as the upper final position.
2. Select "Activate upper stroke limit" (Figure 70).
Figure 68 - Entering a value
Figure 69 - Selecting a menu
⮱
Section 8.3 on page
205