Phoenix Mecano RK Rose+Krieger RK MultiControl II duo accu/DC control Montageanleitung Seite 185

Press the
within the parameter.
Press the
parameter/unit.
Example:
Select the "Change basic height" menu
Figure 33 - Main menu
Figure 34 - "Control" menu
Assembly instructions for the RK MultiControl II duo accu/DC control
button ( ) or the
For some parameters, the unit is set in the last position.
button ( ) to confirm the setting after changing the final position of the
button ( ) to jump one position to the right or to the left
◼ User
Staff:
◼ The hand switch has been connected.
Prerequisite:
1. ⇨ The main menu (Figure 33) is displayed.
Press the button.
◼ Press and hold the
2. Select the "Control" menu item:
◼ Confirm the selection with the
"Control" menu item is displayed.
⇨ The "Control" menu item (Figure 34) is selected.
buttons until the
button ( ).
185