External Stop Input" Menu - Phoenix Mecano Rk Rose+Krieger Rk Multicontrol Ii Duo Accu/Dc Control Montageanleitung

Assembly instructions for the RK MultiControl II duo accu/DC control
Deactivating the safety edge
⇨ The safety edge has been deactivated.
3.
Select "Deactivate safety edge" (Figure 77).
If drive group management is activated, this function is only
effective for drives of the drive group in which it has been
activated.
Therefore, the function has to be activated separately for every
affected drive group.
8.5.4.2

"External stop input" menu

A stop input switch supplied by the operator can be connected
to the RK MultiControl II duo accu/DC to safeguard crushing
and shearing points.
The stop input is deactivated at the factory.
◼ The operator's stop input switch has been connected.
Prerequisite:
◼ The main menu for the hand switch is displayed.
187
Selecting a menu
Select the menu via "Control" → "Stop functions" → "External stop
1.
input" (Figure 78).
Figure 77 - Deactivating the safety edge
⮱
Page 172
⮱
Page 168
⮱
Section 8.3 on page
209