Accessories; Hand Switch; Battery - Phoenix Mecano Rk Rose+Krieger Rk Multicontrol Ii Duo Accu/Dc Control Montageanleitung

4.3

Accessories

4.3.1
A
The hand switch (Figure 3) is equipped with 2 function keys in one version. The other
version has 6 function keys and a display screen.
4.3.2
◼ 3 Ah li-ion battery (Würth item no. 0700957730)
Two battery versions from Würth and Milwaukee can be used to power the control.
◼ 5 Ah li-ion battery (Würth item no. 0700957731)
◼ 3 Ah li-ion battery M28 BX (Milwaukee item no. 4932352732)
◼ 5 Ah li-ion battery M28 B5 (Milwaukee item no. 4932430484)
These are lithium-ion batteries with an output current of 3 or 5 amps and a voltage of
28 V.
Operating time (example): An RK MultiControl II duo accu with a 5 Ah battery and + 2
Slimlifts (1000 N) achieves 140 double strokes under full load.
The stand-by time of the MultiControl II duo accu with a 5 Ah battery is 15 days.
The above batteries are not included with the MultiControl II duo accu/DC. You can
order them directly from the respective manufacturer or from the distributor of your
choice.
Assembly instructions for the RK MultiControl II duo accu/DC control

Hand switch

Figure 3 - Overview of hand switch
Hand switch with 2 function keys
⮱
Section 7 on page 177

Battery

B Hand switch with 6 function keys
⮱
Section 8 on page 181
149