Assembly; Safety Information For Assembly; Conditions At The Installation Site - Phoenix Mecano Rk Rose+Krieger Rk Multicontrol Ii Duo Accu/Dc Control Montageanleitung

6

Assembly

6.1

Safety information for assembly

Improper assembly
6.2

Conditions at the installation site

The following conditions must be met at the installation site for the control:
◼ Sufficient lighting is available.
◼ The installation site is clean and dry, and free from dust and objects.
◼ The atmosphere must be free from solvents.
◼ All of the connections required on site are available.
◼ Room temperature: +5 to +40 °C
◼ Relative humidity: 30 - 75 %
◼ Air pressure: 700 hPa - 1600 hPa
◼ Temperatures below the dew point are not permitted.
164
WARNING!
Risk of injury due to improper assembly!
Improper installation and assembly can lead to severe injuries and
substantial material damage.
– Before starting work, ensure that there is sufficient space for
assembly.
– Handle exposed components with sharp edges carefully.
– Ensure that the assembly site is kept clean and tidy at all
times! Components and tools lying around or on top of one
another are sources of accidents.
– Assemble components properly. Adhere to the required screw
tightening torques.
Assembly instructions for the RK MultiControl II duo accu/DC control