Installation declaration
1
Installation declaration
1.1 Declaration of Incorporation Powerlift, external control
As set out in Machine Directive 2006/42/EC, Appx. II, 1.B for incomplete machines
Manufacturer
RK Rose+Krieger GmbH
Potsdamer Straße 9
D-32423 Minden
Description and identification of the partly completed machine.
Product / item:
Type:
Function:
The following basic requirements of Machine Directive 2006/42/EC as set forth in Appendix 1
are applied and met:
1.1.5.; 1.3.2.; 1.3.3.; 1.3.4.; 1.3.7.; 1.3.8.; 4.1.2.3.; 4.1.3.
Moreover, we declare that the special technical documents have been created according to
Annex VII Part B.
The manufacturer declares explicitly that the incomplete machine meets all the relevant provi-
sions of the following EC directives:
2011/65/EC
Source of the harmonized standards according to Article 7, paragraph 2:
EN ISO 12100:2010
The manufacturer or the person authorised are obliged to hand over the special documents for
the partially completed machine to the national authorities on reasoned request. This transfer
is carried out in agreement, in electronic or paper format. The commercial protective rights
remain unaffected by this.
Important note! The partially completed machine must only be put into operation once, if
required, it has been determined that the machine in which the partially completed machine is
to be installed complies with the regulations of this guideline.
Minden / 01.06.2023
Place / Date
30
The person in the community that is authorised to compile the
relevant technical documents.
Michael Neubaur
RK Rose+Krieger GmbH
Potsdamer Straße 9
D-32423 Minden
Powerlift rack / spindle / telscopic
External control
Electromotive extension and retraction of the inner profile to generate a
linear movement.
RoHS
Safety of machinery - General principles for design - Risk assessment
and risk reduction (ISO 12100:2010)
Björn Riechers
Managing Director