Switch Off Motor - Wilo Yonos GIGA2.0-I Einbau- Und Betriebsanleitung

en
Emergency operation
Pump OFF
Pump ON
Fig. 43: Setting emergency operation
Control settings
Setpoint Δp-v
Emergency operation
Emergency operation speed
Fig. 44: Setting the emergency operation
speed
Emergency operation
speed
3800 /Min
Fig. 45: Emergency operation speed
10.5

Switch off motor

Control settings
Setpoint n-c
Setpoint source
Pump ON/OFF
Fig. 46: Control setting pump ON/OFF
164
In the "Emergency operation" menu, you can choose between "Pump OFF" and "Pump ON".
To do this, select the following in succession:
Universal
1.0
1.1
1.1.7
OFF
ON
If "Pump ON" is selected, the corresponding speed can be set in the "Emergency operation
speed" submenu:
Universal
1.0
1.1
3
1.1.8
3
Menu item opens only when emergency operation is set to "ON".
After confirming the emergency operation speed setpoint, the "Control setting" menu opens
again.
The motor of the pump can be switched on and off in the "Settings" menu
select the following in succession:
Universal
1.0
1.1
1.1.15
OFF
ON
Installation and operating instructions • Wilo-Yonos GIGA2.0-I/-D • Ed.01/2023-03
Display text
Settings
Control settings
Emergency operation
Pump OFF
Pump ON
Display text
Settings
Control settings
3
Emergency operation speed
Display text
Settings
Control settings
Pump ON/OFF
Switched off
Switched on
. To do this,