Wilo Yonos GIGA2.0-I Einbau- Und Betriebsanleitung Seite 159

Settings
Control settings
External interfaces
Dual pump management
Fig. 33: Settings menu
Fig. 34: Settings menu
9.4.9 Settings dialogues
Control mode
Δp-v
Δp-c
n-c
Fig. 35: Settings dialogue
Installation and operating instructions • Wilo-Yonos GIGA2.0-I/-D • Ed.01/2023-03
The "Settings" menu is selected by turning the operating button to the "gear wheel" symbol
.
Confirm the selection by pressing the operating button. Selectable submenus open.
Select a submenu by turning the operating button to the right or left. The selected submenu
item is highlighted in colour.
Press the operating button to confirm the selection. The selected submenu or downstream
settings dialogue appears.
NOTICE
If there are more than three submenu items, this is indicated by an arrow
1
above or below the visible menu items. Turn the operating button in
the corresponding direction to open the submenu items on the display.
1
An arrow above or below a menu area indicates that additional submenu items are avail-
able in this area. These submenu items are accessed by turning
2
An arrow ˜˜˜˜˜ to the right in a submenu item indicates that another submenu is access-
ible. Pressing the operating button opens this submenu.
If there is no arrow pointing to the right, a settings dialogue can be accessed by pressing the
operating button.
NOTICE
Briefly press the Back button
menu.
Briefly press the Back button
screen. If there is an error, pressing the Back button
error display (Section "Error messages" [" 199]).
If there is an error, holding down the Back button
you back to the Home screen or to the error display from any settings dia-
logue and from any menu level.
Settings dialogues have been highlighted with a yellow frame and show the current setting.
Turn the operating button to the right or left to adjust the highlighted setting.
Press the operating button to confirm the new setting. The focus returns to the menu you
opened.
If you do not turn the operating button before pressing, the previous setting remains un-
changed.
One or more parameters can be set in the settings dialogues.
• If only one parameter can be set, the focus returns to the menu you opened after having
confirmed the parameter value (pressing the operating button).
• If several parameters can be set, the focus changes to the next parameter after having
confirmed a parameter value.
If you confirm the last parameter in the settings dialogue, the focus returns to the menu
you opened.
Press the "Back" button
changed value will be discarded because it had not been confirmed.
Press the operating button to check set parameters and switch between them. In this
process, existing parameters are once again confirmed, but not changed.
NOTICE
Press the operating button without selecting another parameter or adjust-
ing another value to confirm the setting.
Press the Back button
previous setting. The menu changes to the previous setting or previous
menu.
in a submenu to return to the previous
in the main menu to return to the Home
to return the focus to the previous parameter. The previously
to discard the current adjustment and retain the
en
the operating button.
takes you to the
(> 1 second) takes
159