Application And Function Of The Digital Control Input Di1 - Wilo Yonos GIGA2.0-I Einbau- Und Betriebsanleitung

12.6 Application and function of the di-
gital control input DI1
Installation and operating instructions • Wilo-Yonos GIGA2.0-I/-D • Ed.01/2023-03
Universal Display text
1.3 External interfaces
1.3.6 SBM relay
1.3.6.7 SBM relay
forced control
1.3.6.7 / 1 Normal
1.3.6.7 / 2 Forced active
1.3.6.7 / 3 Forced inactive
Selection options:
SBM relay
Forced control
Normal
Forced active
Forced inactive
Table 25: Selection option SBM relay forced control
The "Forced active" setting permanently activates the relay. This means that, for example,
an operating note (light) is permanently displayed/announced.
The "Forced inactive" setting leaves the relay permanently without a signal. No operating
note can be confirmed.
The pump can be switched on or off via external potential-free contacts at the digital in-
put.
The following table provides an overview of the "Control input" menu:
Universal Display text
1.0 Settings
1.3 External interfaces
1.3.2 Control input
1.3.2.1 Control input function
1.3.2.1 / 1 Not used
1.3.2.1 / 2 External OFF
1
1.3.2.2 Twin-head Pump ext. OFF function
1.3.2.2 / 1 System mode
1.3.2.2 / 2 Single mode
1.3.2.2 / 3 Combined mode
1
The submenu only opens when the twin-head pump is connected
Possible settings:
Help text
SBM: Depending on the SBM configuration, the pump
status influences the SBM relay switching status.
SBM relay switching status is forced ACTIVE.
CAUTION:
SBM does not display the pump status!
SSM/SBM relay switching status is forced INACTIVE.
CAUTION:
SBM does not display the pump status!
1
en
177