Overview Of The Analogue Inputs Ai1 And Ai2; Overview Of The Twin-Head Pump Connection - Wilo Yonos GIGA2.0-I Einbau- Und Betriebsanleitung

Overview SBM-relay
Forced control: No
Current status: Not energized
Fig. 94: Overview of the relay function SSM
15.7 Overview of the analogue inputs
AI1 and AI2
Overview of analogue
input (AI1)
Type of use:
Differential pressure sensor
Signal type: 2 – 10 V
Current value:
3.8 m (3.50 V)
Fig. 95: Overview of analogue input (AI1)
15.8 Overview of the twin-head pump
connection
Installation and operating instructions • Wilo-Yonos GIGA2.0-I/-D • Ed.01/2023-03
Universal
2.0
2.1
2.1.9
Relay function: SBM
Forced control: Yes
Forced control: No
Current status: Energized
Current status: Not ener-
gized
You can read the status information on the AI1 and AI2 analogue input in the menu
"Diagnosis and measured values". To do this, select the following:
Universal
2.0
2.1
2.1.4
Type of use:
Not used
Differential pressure
sensor
External sensor
Setpoint input
Signal type:
Current value: :
2.1.5
Type of use:
Not used
External sensor
Setpoint input
Signal type:
Current value: :
The following status information is available:
• Type of use
• Signal type
• Current measured value
You can read status information on the twin-head pump connection in the menu
"Diagnostics and measured values". To do this, select the following:
Display text
Diagnostics and measured values
Diagnostics help
Overview SBM-relay
Relay function: SBM
Forced control: Yes
Forced control: No
Current status: Energized
Current status: Not energized
Display text
Diagnostics and measured values
Diagnostics help
Overview of analogue input (AI1)
Type of use:
Not used
Differential pressure sensor
External sensor
Setpoint input
Signal type:
Current value:
Overview of analogue input (AI2)
Type of use:
Not used
External sensor
Setpoint input
Signal type:
Current value:
en
195