Application And Function Of Cif Module; Display Settings; Display Brightness - Wilo Yonos GIGA2.0-I Einbau- Und Betriebsanleitung

Wilo Net address
Fig. 82: Wilo Net address menu
12.9 Application and function of CIF
module
13

Display settings

Display settings
Brightness
Language
Units
Fig. 83: Display settings menu
13.1

Display brightness

Installation and operating instructions • Wilo-Yonos GIGA2.0-I/-D • Ed.01/2023-03
Universal
1.0
1.3
1.3.5
1.3.5.2
Each pump must be assigned its own address (1 ... 2).
NOTICE
The setting range for the Wilo Net address is 1 ... 126, all values in the
range 22 ... 126 may not be used.
Twin-head pump example:
• Pump head left (l)
–
Wilo Net termination: ON
–
Wilo Net address: 1
• Pump head right (II)
–
Wilo Net termination: ON
–
Wilo Net address: 2
Depending on the type of CIF module inserted, a
ciated settings menu is displayed in the menu.
The required settings of the CIF modules in the pump are described in the user manual of
the CIF modules.
General settings can be changed under
The following table gives an overview of the "Display settings" menu:
Universal
1.0
1.5
1.5.1
1.5.2
English
Deutsch
Français
Universal
1.5.3
m, m³/h
kPa, m³/h
kPa, l/s
ft, USGPM
1.5.4
1.5.4.1
The display brightness can be changed under
brightness is shown in a percentage. 100 % brightness corresponds to maximum possible,
5 % is the minimum possible brightness.
Universal
1.0
1.5
Display text
Settings
External interfaces
Wilo Net setting
Wilo Net address
"Settings", "External interfaces" asso-
"Settings", "Display Settings".
Display text
Settings
Display settings
Brightness
Language
English
German
French
Universal
Units
3
m, m /h
3
kPa, m /h
kPa, l/s
ft, USGPM
Key lock
Key lock ON
"Settings", "Display settings". The level of
Display text
Settings
Display settings
en
187