Overview Of The Pump Cycling Status; Measured Values - Wilo Yonos GIGA2.0-I Einbau- Und Betriebsanleitung
Vorschau ausblenden
Andere Handbücher für Yonos GIGA2.0-I:
- Einbau- und betriebsanleitung (116 Seiten) ,
- Einbau- und betriebsanleitung (424 Seiten)
Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
en
Twin-head pump
connection info
Partner paired and reachable
Partner WCID: BOCO154
Partner address: 2
Partner name:
Fig. 96: Information on the twin-head pump
connection
15.9
Overview of the pump cycling
status
Pump cycling status
Time-based pump cycling:
Switched on Interval: 24 h
Current status:
This pump is running
Next execution in: 23h 56m
Fig. 97: Information on the pump cycling
status
15.10
Measured values
196
Universal
2.0
2.1
2.1.6
Partner paired and reach-
able.
Partner is paired.
Partner is not reachable.
1
Partner WCID:
Partner Address:
Partner Name:
1
WICD = Wilo Communication ID (Communication address of the twin-head pump partner)
NOTICE
The twin-head pump connection overview is only available if a twin-head
pump connection has been previously configured (see "Dual pump man-
agement" [" 165] section).
You can read the status information on the pump cycling in the menu
measured values". To do this, select the following:
Universal
2.0
2.1
2.1.7
Time-based pump cyc-
ling: |
Switched ON, interval: |
Switched OFF
Current status:
No pump is running.
Both pumps are running.
This pump is running.
Other pump is running.
Next execution in: |
•
Pump cycling switched on: yes/no
The following additional information is available when pump cycling is switched on:
•
Current status: No pump running / both pumps running / main pump running / pump part-
ner running.
•
Time until next pump cycling
You can read operating data, measured values and statistical values in the menu
gnosis and measured values". To do this, select the following in succession:
Installation and operating instructions • Wilo-Yonos GIGA2.0-I/-D • Ed.01/2023-03
Display text
Diagnostics and measured values
Diagnostics help
Twin-head pump
connection info
Partner paired and reachable.
Partner is paired.
Partner is not reachable.
1
Partner WCID:
Partner address:
Partner name:
Display text
Diagnostics and measured values
Diagnostics help
Pump cycling status
Time-based pump cycling
Switched on, interval
Switched off
Current status:
No pump is running.
Both pumps are running.
This pump is running.
Other pump is running.
Next execution in:
"Diagnosis and
"Dia-
Werbung
Inhaltsverzeichnis
