Installation Of Cif Module; Commissioning - Wilo Yonos GIGA2.0-I Einbau- Und Betriebsanleitung

en
8

Installation of CIF module

9

Commissioning

150
Component Fig./Item screw
(nut)
Wilo-Connectivity Fig. 1, Item 8
Interface cover
Module fan Fig. 107
Table 14: Tightening torques for electronic module
*Tighten when installing the cables.
**Press with screwdriver to plug and unplug the cable.
DANGER
Risk of fatal electrical shock!
Immediate danger of death if live components are touched!
• Check whether all connections are voltage-free!
CIF modules (accessories) are used for communication between pumps and building man-
agement systems. CIF modules are plugged into the electronic module (Fig. 26, Item 4).
• For twin-head pumps, only the main pump must be equipped with a CIF module.
• For pumps in Y-pipe applications in which the electronic modules are connected to each
other through the Wilo Net, only the main pump also requires a CIF module.
NOTICE
When using CIF module Ethernet, the use of the accessory "Connection
M12 RJ45 CIF-Ethernet" is recommended.
Required for easy disconnection of the data cable connection via the
SPEEDCON socket outside of the electronic module when maintenance
of the pump is required.
NOTICE
Explanations on commissioning as well as application, function and con-
figuration of the CIF module on the pump are described in the installation
and operating instructions for the CIF modules.
• Electrical work: Electrical work must be performed by a qualified electrician.
• Installation/dismantling work: The installation/dismantling must be carried out by a
qualified technician who is trained in the use of the necessary tools and fixation materi-
als.
• The product must be operated by persons who are instructed on how the complete sys-
tem functions.
Installation and operating instructions • Wilo-Yonos GIGA2.0-I/-D • Ed.01/2023-03
Screw drive/ Tightening
thread torque
[Nm] ±10 %
(unless other-
wise stated)
Internal 0.6
hexagon
socket/ M3x10
IP10/ 1.9
AP 40x12/10
Installation
informa-
tion