Wilo Yonos GIGA2.0-I Einbau- Und Betriebsanleitung Seite 169

Twin-head pump
pairing status
Pairing successful
Reset will follow
Fig. 51: Successful twin-head pump connec-
tion
Twin-head pump
pairing status
Pairing failed
Partner not found
Partner node ID: 2
Fig. 52: Failed dual connection
Twin-head pump function
Main/reserve
Peak-load operation
Fig. 53: Twin-head pump function menu
Installation and operating instructions • Wilo-Yonos GIGA2.0-I/-D • Ed.01/2023-03
Successful twin-head pump connection:
Universal
Double pump pairing
status
Pairing successful.
Reset will follow.
NOTICE
Activating the twin-head pump connection fundamentally changes vari-
ous parameters of the pump. The pump is then started automatically.
Failed twin-head pump connection:
Universal
Double pump pairing
status
Pairing failed.
Partner not found.
Partner Node-ID:
NOTICE
If there is an error in the twin-head pump connection, the partner address
must be reconfigured! Always check the partner addresses beforehand!
Menu "Twin-head pump function"
When a twin-head pump connection is established, you can switch between the following
functions in the "Twin-head pump function" menu:
• Main/standby operation and
• Efficiency-optimised peak-load operation (parallel operation)
Universal
1.4.3
1.4.3.1
1.4.3.2
NOTICE
When switching the twin-head pump function, different parameters of the
pump are fundamentally changed. The pump is then automatically restar-
ted.
The main menu then opens again.
Display text
Twin-head pump pairing status
Pairing successful
Reset will follow
Display text
Twin-head pump pairing status
Pairing failed
Partner not found
Partner node ID:
Display text
Twin-head pump function
Main/reserve
Peak-load operation
en
169