Manitou MRT1850 Privilege Handbuch Seite 243

CONTENTS
DL 43
DL 28
DL 27
DL 25
DL 45
DL 20
DL 19
DL 44
DL 29
DL 26
DL 23
DL 21
DL 42
DL 17
DL 41
DL 36
DL 46
Free exit (Must be off)
This 3 led are connected to 3 relais that
changes the movement of: telescope,
optional, tilting, rotation, lifting from
basket or remote-control to the cab
This exit gives power supply to the basket's
push-button panel
This exit is used to light the yellow warning
light of the push-button panel and to
activate the buzzer. The signal is
continuous when the basket is overload and
flickering when MSS is on alarm
This exit activates the electrovalve of the
pendulum basket tilting
This exit simulate the overload micro .
This exit is activate when is possibile to
telescope the boom, and the manipulator is
moved.
This exit is activate when is possibile to use
the optional, and the manipulator is moved.
Input coming from emergency red
emergency button
Exit used to activate the rear axle locking
yellow light
Exit that give the information to Mss
system that the cab is on frontal position
Exit used to control the general valve for
moving outriggers.
Exit used to activate the levelling
Man'presence
This led indicate the movement's speed
X
Movements from Movements from
basket' or cab
remote control
Power not given Power given
Overload or Mss Basket not
alarm on overload or Mss
alarm off
Electrovalve Electrovalve not
activated activated
Not overload Overload
Telescope Telescope not
activated possible
Optional Optional
activated deactivated
Red-button not Red-button
pushed pushed
Rear axle locked Rear axle not
locked
Frontal position 360° position
Valve activated Valve not
activated
Levelling Levelling not
enabled enabled
Man not present Man's presence
Slow Fast