Pre-Operation Checks - Yamaha Rd250(D) Betriebsanleitung

PRE-OPERATION CHECKS
Before using this m o t o r c y c l e check the f o l l o w i n g points:
Item Routine
Brakes Check operation/adjustment/brake fluid/brake pads
Clutch Check operation/lever adjustment
Autolube tank Check oil level/top-off as required
Transmission Check oil level/top-off as required
Drive chain Check alignment/adjustment/lubrication
Throttle Check for proper throttle and Autolube cable Operation
Air filter Foam type—must be clean and damp w/oil always
Wheels and tires Check pressure/wear
Fittings/fasteners Check all—tighten as necessary
Lights/signals Check headlight/tail—stoplights
N O T E :
Pre-operation checks should be made each t i m e the machine is used. S u c h an inspection can
be t h o r o u g h l y accomplished in a very short t i m e ; and the added safety it assures is more than
w o r t h the time involved.
- 3 6 -