Yamaha RD250(D) Betriebsanleitung Seite 106

F r o n t brake adjustment
The front brake lever should be so adjusted
that it has a free play of 5 ~ 8 m m from
when the brake lever is pulled to when the
adjusting screw is jsut touched the master
cylinder.
1. Loosen the adjusting screw l o c k n u t at
the brake lever.
2. T u r n in the adjusting screw until it
lightly touches the master cylinder, then
turn it out by approx. 3/4 turns (for
proper freeplay).
3. A f t e r adjusting, tighten the locknut.
Rear brake
The rear brake pedal should be so adjusted
that it has a free play of 13 — 15 m m f r o m
when the brake pedal is trod to when the
brake begins to be effected.
— 104 -
1. Adjusting screw 1. Vis de reglage 1- Einstellschraube
2.
Adjuster locknut 2.
E c r o u de blocage
2
*
a n s t X " "
6 1
" * "