Charging The Range Extender; Check The Range Extender State Of Health; Range Extender Led Error Codes - Orbea Blue Paper Rise Hydro 2022 Bedienungsanleitung

92 | ORBEA
Standalone Range Extender battery level:
Press once the Range Extender main button to know the

CHARGING THE RANGE EXTENDER

Read the Charging the Batteries section on Use of Rise
chapter of this manual to learn about the charging proce-
To protect the charger and the batteries,
the RS Smart Charger disables itself once
If you want to charge the internal battery
the charger from the mains outlet and plug
If you have not disconnected the charger
from the outlet between charges, the charger
Read the Relevant Information about the
RS Batteries section of this manual to know
more about the care, use and troubleshoot-
ing procedures of the Range Extender and
STATE OF HEALTH
TECHNICAL MANUAL
CHECK THE RANGE EXTENDER STATE
OF HEALTH
The lithium-ion batteries state of health is affected by the
number of charging cycles and the use, charge and stor-
-
Under normal conditions, if the recommendations of use,
charge and storage described in this manual are observed,
the RS batteries may see their lifetime or capacity reduced
This state of health assumption refers to bat-
This can be affected by their use, storage
and charge under very cold conditions, by
storing the batteries for long periods of time
without restoring the charge level, by using
the batteries repeatedly with very low charge
To know your Range Extender state of health, connect the
battery to a compatible bicycle (the bicycle will turn itself
off if it was on) and turn the bicycle on with the Range
The four Range Extender LEDs will light from right to left
and then will blink showing the current battery state of
75%-100%
75%-100%
50%-74%
50%-74%
25%-49%
25%-49%
1%-24%
1%-24%
0%
B LUE PAP ER R I SE · H YD R O 2022
RANGE EXTENDER
LED ERROR CODES
If the Range Extender does not hold or accept charge or it
does not provide power to the motor,press once the battery
PRESS LEDs CODE ERROR
error
Shortcircuit or current
too high
Temperature protection
ORBEA | 93
an Orbea dealer must take when diagnosing
If an user is not able to solve an error or
malfunction of the Range Extender following
the table below, he must contact and autho-
rized Orbea dealer, who will process a claim
through Orbea and inform the user of the
SOLUTION
Contact Orbea
and charging port for debris, humidity
or foreign objects
If the problem
Wait until the temperature is inside
presists, contact
Charge the battery with the RS
Smart Charger
E N