Orbea BLUE PAPER RISE HYDRO 2022 Bedienungsanleitung Seite 43

84 | ORBEA
2.5
1. Remove the right crank arm following the manufacturer
E-Thirteen Plus EP8 Cranks:
-
cles/360058908731-Shimano-E-spec-Crank-Manual
Shimano FC-EM900/FC-EM600 Cranks:
2. Remove the top part of the chainguide to allow the
5.
TECHNICAL MANUAL
4
4
2
3
1
3.
It is necessary for the rear wheel and the chain to be
installed on the bike to allow you to lock the chainring
by holding the rear wheel in place and thus allow you to
Use the Shimano TL-FC39 and TL-FC33 tools to remove
4. Remove the chainguide bracket to gain access to the
6
-
6
5
6
6
B LUE PAP ER R I SE · HYDRO 2022
6
6. Carefully remove the motor from the frame to avoid
7. Disconnect the battery cable and the speed sensor and
8.
When installing back the top bushings and the motor,
the battery cable must be guided on top the left bus-
6
6
ORBEA | 85
7
8
E N