Recycle; Warranty Information; 3 Connecting The Ep8 System To Etube Professional - Orbea Blue Paper Rise Hydro 2022 Bedienungsanleitung

100 | ORBEA
· Always keep the bicycle charge point cover closed when
· Do not introduce metallic object into the battery pins or
· Do not allow the battery charger to get wet or use it
· Do not use the charger when it is covered with a cloth
· Do not touch the metallic parts of the batteries or ther
· Do not use the charger to charge the battery outdoors
· Do not hold the charger by its cable when carrying it
and avoid wrapping the cable around the main body of
· Do not pedal or perform any kind of battery discharging
· Always remove the Range Extender from the bicycle
· Wait for an hour if you would like to charge the battery
· It is recommend to charge the battery in an area with a
· It is not recommended to have the battery connected
permanently to the charger to avoid damage to the bat-
TECHNICAL MANUAL
R ECYCLE
· Battery packs, accessories and packaging should be
For information on used batteries, enquire your local au-
· The battery may not be disposed of as household
WAR R A NTY IN FO RMATION
· Charge the battery at least every 3 months to approxi-
· Products are not guaranteed against natural wear and
· The life of the battery will vary depending on factors
such as the storage method, the usage conditions, the
surrounding environment and the characteristics of
· If the battery has become completely empty, charge it
it may cause the battery to deteriorate and become
· Please do not disassemble the battery or other related
· Read the Warranty section of this manual to lear more
about the Orbea warranty and the warranty claim
B LUE PAP ER R I SE · H YD R O 2022

13 CONNECTING THE EP8 SYSTEM TO ETUBE PROFESSIONAL

USING THE SHIMANO SM-PCE02 INTERFACE
(INFORMATION FOR DEALERS)
The system diagnostics using the Etube Professional tools
As an user, you can use the Shimano Etube Project app for
smartphones to connect your bicyle, customize the system
To access all the information of the Shimano EP8 system
To connect the EP8 system on Rise to Etube Professional,
It is also possible to connect and diagnose individual com-
the full Etube Professional manual here:
stop_the_project/toc_concept_s2q_vmh_tlb
Shimano SM-PCE1 interface: The Ep8 sys-
tem can also be connected to Etube Profes-
To use the PCE1 it is necessary to use the
SM-PCE02
EW-SD50 PC
USB-Micro USB cable
Link cable
ORBEA | 101
E N