KLS Martin group SonicWeld Rx Gebrauchsanweisung Seite 89

Ultrasonic Unit SonicWeld Rx®
Instructions for Use
Recommended separation distances between portable and mobile RF telecommunications equipment and the
Gebrüder Martin SonicWeld Rx®
The SonicWeld Rx® is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The
user can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF
telecommunications equipment (transmitters) and the device as recommended below, depending on the maximum output power
of the communications equipment.
Rated maximum output P of
transmitter in watts
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can
be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of
the transmitter in watts (W) according to the transmitter manufacturer.
Note 1
Note 2
Revision 04
Separation distance according to frequency of transmitter (in m)
150 kHz to 80 MHz
1 = 17 .
d P
0.12
0.38
1.2
3.8
12
At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
80 MHz to 800 MHz
1 = 17 .
d P
0.12
0.38
1.2
3.8
12
800 MHz to 2.5 GHz
2 = 33 .
d P
0.23
0.73
2.3
7.3
23
89