HBM TIM-EC Montageanleitung Seite 59

Max. speed [rpm]
Type
Zero index
Angle of rotation resolution
Reset angle with
Max. angle [degree]
Angle offset [degree]
Angle interpolation
Glitch filter
Save
Max. rpm
If this value is exceeded by 5%, an error flag is set in the fieldbus.
Type
If the speed signal is output by a quadrature transducer (connections A+F1/A+F1, 90°
shifted A+F2/A+F2), this can be set here. In this case, the direction of rotation is also
derived from this signal.
If a transducer with just one track is connected, it must be connected to A+F1/A+F1 and
no direction of rotation will be available.
Notice
Only external encoders with standard 5V as per the RS422 standard may be connected.
Angle resolution
S
1x - The F1 leading edges are evaluated
S
2x - The F1 leading and trailing edges are evaluated
S
4x - The F1 and F2 leading and trailing edges are evaluated
TIM-EC
SETTINGS
Taken over by the transducer
With manual selection: 1-50000
If the maximum speed is exceeded by 5%, an error
flag is set in the fieldbus.
Taken over by the transducer
With manual selection: Quadrature ; Basic
Taken over by the transducer
With manual selection: Yes/No
1x; 2x; 4x
(4x is only available when type = Quadrature)
®
EtherCAT ; Manual; Zero index
360; 720; Max**
0 ... ±Max. angle**
On/Off
Off, 82ns, 1μs, 10μs, 100μs
57