Frequency / Analog Output - HBM TIM-EC Montageanleitung

Information
The standard delivery passcode is 0000.
The passcode is stored in the stator of the torque transducer. It is thereby independent of
TIM-EC.

10.4.2 Frequency / Analog output

Fig. 10.23 Frequency/analog output
The Frequency/analog output menu can be used to change the center frequency (torque
output frequency) of the stator output connector 1. The number of center frequency
changes is stored in the stator. The number of changes can therefore be seen in the
counter. Possible settings of the output frequency:
TIM-EC
54
SETTINGS