Fieldbus Interface - HBM TIM-EC Montageanleitung

10.3.4 Fieldbus interface

Fig. 10.14 Fieldbus interface
®
The Fieldbus interface menu shows which channels are actually output on the EtherCAT
®
interface. In the standard setting, all available PDOs are transferred in an EtherCAT
frame. The PDO mapping of the process data can be individually and freely configured via
®
the EtherCAT master. See also Chapter 11.3 Parameterizing process data
You can specify how the measurement system should react to incorrect measured values
under Error settings. The following settings are possible:
TIM-EC
38
SETTINGS