HBM TIM-EC Montageanleitung Seite 51

Fig. 10.20 Parameterization of intercommunication in the web server
If the modules are operated via the 10+2 interface, the head station, which is the left
module, to which the torque transducer is connected, must be parameterized as super-
master. Then the module or modules without attached torque transducer must be con­
figured as "Slave."
TIM EC intercommunication is designed for operation of max. 4 torque interface modules
on one torque transducer (see Fig. 10.21).
TIM-EC
49
SETTINGS