Restore Ip Address; Activating Dhcp - HBM TIM-EC Montageanleitung

9.2

Restore IP address

1. Press the Reset button on the TIM-EC for about 15 seconds while the power supply is
switched on.
2. Open a web browser (e.g. Internet Explorer) and enter the current IP address, e.g.
http://192.168.1.2.
Information
If DHCP mode has been activated, it will also be reset.
9.3

Activating DHCP

If DHCP (Dynamic Host Configuration Protocol) is supported in a network, it can be acti­
vated in TIM-EC. To do this, open the network settings in Basic Settings ³ Network and
activate the DHCP client. The default setting is Off.
TIM-EC
CONNECTION TO A PC OR NETWORK
19