HBM TIM-EC Montageanleitung Seite 31

Working parameter sets can be saved in any one of the 32 parameter sets or overwritten
by loading one of the 32 parameter sets or the factory default parameter set.
It is possible to load a parameter set either via the web browser or via EtherCAT
from the working parameter set, the actual settings can also be described by further non-
parameter specific settings (working data). This includes, for instance, the network or
linearization settings.
Any changes that are not explicitly saved are rejected and not saved when exiting a page.
This means that the old values of the actual working parameter set and the working data
are used next time that page is called. (file name tim-ec).
Click on the link Configuration file and confirm the download into a directory of your
choice.
Important
Settings in TIM-EC are only saved when they are saved in a parameter set or in the device.
Otherwise the settings will be lost after switch off.
The following parameters are saved in a parameter set. All data from:
S
3.3 Units/filters
S
4.3 Speed transducer
All other data are saved in TIM-EC.
TIM-EC
SETTINGS
®
. Apart
29