Parameters Tim; Passcode - HBM TIM-EC Montageanleitung

10.3

Parameters TIM

10.3.1 Passcode

Fig. 10.7 Passcode
You can protect your settings in the Passcode menu. Other users can only read your set­
tings, not change them. The zero setting and activation of the shunt is independent of the
passcode.
In the delivery condition, the passcode is activated and no settings can be made. It is only
possible to change the parameters after pressing the Enable settings button.
The passcode must be a 4 digit number combination.
Information
The standard passcode is 0000.
TIM-EC
30
SETTINGS