HBM TIM-EC Montageanleitung Seite 54

Information
TMC input mode: All diagnostic functionalities are available on EtherCAT
"Frequency" input mode: Only the diagnostics error flag for measured value overflow or
underflow ±120% relative to the nominal (rated) torque is available. No other diagnostic
functionalities for torque are available.
In addition, the shunt signals cannot be triggered by the TIM-EC if the frequency output is
used.
Information
Frequency mode is suitable for HBM torque transducers
52
®
, see section 11.
TIM-EC
SETTINGS