Mounting; Dismounting - HBM TIM-EC Montageanleitung

6

MOUNTING

The interface module TIM-EC is mounted on a DIN EN 60715 rail.
A spring on the back holds the housing in position.
6.1 Mounting
1. Hook the interface module into the upper guide of the DIN rail.
2. Press the housing against the DIN rail until the spring engages in the lower guide.
6.2

Dismounting

1. Push the housing up vertically and then tilt it slightly forward.
2. Pull the housing out downwards from the DIN rail.
10
TIM-EC
MOUNTING