HBM TIM-EC Montageanleitung Seite 43

Table of errors in angle of rotation
Speed system not
present [static]
Speed system cannot
be sufficiently
determined
[static]
Reset with zero index
[static]
Compatibility error
[static]
Table of errors in power
Error in torque or
speed
[static]
or
[dynamic]
Error at overflow
[dynamic]
TIM-EC
SETTINGS
Web browser selection set to "determine automatically from
transducer" and the torque transducer is not outputting any
information about the speed system or a speed system is not
present.
Web browser selection set to "determine automatically from
transducer" and the torque transducer is not outputting any
information about the properties Pulses/Rev., Max. Speed,
Type.
Web browser selection set to "determine automatically from
transducer" and reset with zero index is active, but no zero
index present or cannot be determined if present
The stator and rotor speed systems are not compatible in
physics or version.
Power is a derived quantity. The error flag is set for dynamic
errors of speed or torque (over or underflow, CRC error, no
data reception).
The result from the calculation
P = 2 x Pi x speed x torque is too large for the internal
processor.
41