10.4
Torque transducer parameters
10.4.1 Passcode
Fig. 10.22 Passcode input
You can make settings to the torque transducer in the Passcode input menu. Various
parameters can also be set here for the connected speed encoder (internal/external).
A passcode is required to set the frequency output in the torque transducer, stator output
connector 1.
In the delivery condition, the passcode is activated and no settings can be made. It is only
possible to change the parameters after pressing the Enable settings button.
The passcode must be a 4 digit number combination.
TIM-EC
53
SETTINGS