Taste Lines - Rohde & Schwarz FSP3 Bedienhandbuch

Softkey - IEC-Befehl

Taste LINES

LINES
SELECT
LIMIT LINE
NEW
LIMIT LINE
NAME
VALUES
INSERT
VALUE
DELETE
VALUE
SHIFT X
LIMIT LINE
SHIFT Y
LIMIT LINE
SAVE
LIMIT LINE
EDIT LIMIT
LINE
COPY
LIMIT LINE
1164.4556.11
Auswahl:
CALCulate<1|2>:LIMit<1...8>:NAME <string>;
CALCulate<1|2>:LIMit<1...8>:UPPer:STATe
CALCulate<1|2>:LIMit<1...8>:LOWer:STATe ON | OFF
Grenzwertprüfung:
CALCulate<1|2>:LIMit<1...8>:STATe ON | OFF
INITiate[:IMMediate]; WAI*
CALCulate<1|2>:LIMit<1...8>:FAIL?
Zuordnung der Meßkurve:
CALCulate<1|2>:LIMit<1...8>:TRACe 1|2|3
Name:
CALCulate<1|2>:LIMit<1...8>:NAME <string>;
Darstellbereich:
C
ALCulate<1|2>:LIMit<1...8>:CONTrol:DOMain
Skalierung:
CALCulate<1|2>:LIMit<1...8>:CONTrol:MODE
CALCulate<1|2>:LIMit<1...8>:UPPer:MODE
CALCulate<1|2>:LIMit<1...8>:LOWer:MODE
Einheit:
CALCulate<1|2>:LIMit<1...8>:UNIT
VOLT|DBUA|AMPere| DB| DBUV_MHZ| DBUA_MHZ| DEG| RAD| S| HZ| PCT
Sicherheitsabstand (Margin):
CALCulate<1|2>:LIMit<1...8>:UPPer:MARGin <num_value>
CALCulate<1|2>:LIMit<1...8>:LOWer:MARGin <num_value>
Schwellenwert bei relativer Y-Skalierung:
CALCulate<1|2>:LIMit<1...8>:UPPer:THReshold <num_value>
CALCulate<1|2>:LIMit<1...8>:LOWer:THReshold <num_value>
Kommentar:
CALCulate<1|2>:LIMit<1...8>:COMMent <string>
CALCulate<1|2>:LIMit<1...8>:CONTrol[:DATA]
CALCulate<1|2>:LIMit<1...8>:UPPer[:DATA]
CALCulate<1|2>:LIMit<1...8>:LOWer[:DATA]
ohne Funktion im IEC-Bus-Betrieb
ohne Funktion im IEC-Bus-Betrieb
CALCulate<1|2>:LIMit<1...8>:CONTrol:SHIFt <num_value>
CALCulate<1|2>:LIMit<1...8>:UPPer:SHIFt <num_value>
CALCulate<1|2>:LIMit<1...8>:LOWer:SHIFt <num_value>
erfolgt bei IEC-Bus automatisch
s. EDIT LIMIT LINE
CALCulate<1|2>:LIMit<1...8>:COPY 1...8 | <name>
RELative | ABSolute
RELative | ABSolute
RELative | ABSolute
DBM| DBPW| WATT| DBUV|
<num_value>, <num_value>..
<num_value>, <num_value>..
<num_value>,<num_value>..
6.4-20
ON | OFF
FREQuency|TIME
FSP
D-1