Appendix; Accessories; Manufacturer-Specific Objects - Emerson AES Serie Systembeschreibung

Standards and directives
DIN EN 60204-1 "Safety of machinery – Electrical equipment of machines – Part 1: General
requirements"

15 Appendix

15.1 Accessories

Table 35: Accessories
Description
Plug, CN2 series, male, M12x1, 4-pin, D-coded, 180° straight cable
exit, for fieldbus line connection X7E1/X7E2
• Max. line that can be connected: 0.14 mm
• Ambient temperature: -25 °C to 85 °C
• Nominal voltage: 48 V
Socket, CN2 series, female, M12x1, 4-pin, A-coded, 180° straight ca-
ble exit, for power supply connection X1S
• Max. line that can be connected: 0.75 mm
• Ambient temperature: -25 °C to 90 °C
• Nominal voltage: 48 V
Socket, CN2 series, female, M12x1, 4-pin, A-coded, 90° angled cable
exit, for power supply connection X1S
• Max. line that can be connected: 0.75 mm
• Ambient temperature: -25 °C to 90 °C
• Nominal voltage: 48 V
Protective cap M12x1
Retaining bracket, 10x
Spring clamp element, 10x, including assembly instructions
Left end plate
Right end plate for stand-alone variant

15.2 Manufacturer-specific objects

Table 36: Manufacturer-specific Ethernet POWERLINK objects
Assignment Object Sub-object
to device no. no.
Device input 0x2000 0
and output
1-124
data
0x2001 0
1-124
Bus coupler 0x2010 0
parameters
1
0x3010 0
1
0x2011 0
1–126
0x3011 0
1
0x2012 0
1
2
0x3012 0
1
1)
Module pa- 0x21nn 0
rameters
1-126
1)
0x31nn 0
AVENTICS™ Ethernet POWERLINK | R412018143-BAL-001-AH | English
Material number
R419801401
2
(AWG26)
8941054324
2
(AWG19)
8941054424
2
(AWG19)
1823312001
R412018339
R412015400
R412015398
R412015741
Contents Default value
Highest sub-object no. 124
Sub-objects that are mapped
to TxPDO (output data)
Highest sub-object no. 124
Sub-objects that are mapped
to RxPDO (input data)
Highest sub-object no. 1
Write parameter byte 0
Highest sub-object no. 1
Parameter byte (string) 0
Highest sub-object no. 0
Read bus coupler parameters Not yet used
(Name plate)
Highest sub-object no. 0
Read bus coupler parameters Not yet used
(Name plate as a string)
Highest sub-object no. 2
Bus coupler diagnostic byte 1
Bus coupler diagnostic byte 2
Highest sub-object no. 1
Bus coupler diagnostic bytes
(string)
Highest sub-object no. 126
Writable parameters Connected depend-
ing on the module
(One byte per sub-object)
type (if a subindex is
written that is not
available in the mod-
ule as a parameter,
the written value is
discarded).
Highest sub-object no. 1
Assignment Object Sub-object
to device no. no.
1
1)
0x22nn 0
1-126
1)
0x32nn 0
1
1)
0x23nn 0
1-5
1)
0x33nn 0
1
1)
nn = module no. 00 to 2A (hexadecimal), corresponds to 00 to 42 (decimal)
Contents Default value
Writable parameters (string) The string length
corresponds to the
number of parame-
ter bytes to be writ-
ten.
Highest sub-object no. 126
Readable parameters Connected depend-
ing on the module
(One byte per sub-object)
type (if a subindex is
read that is not avail-
able in the module
as a readable param-
eter, the value 0 is
returned).
Highest sub-object no. 1
Readable parameters (string) The string length
corresponds to the
number of parame-
ter bytes to be read.
Highest sub-object no. 5
Diagnosis of the module The minimum
length is 1 byte
(One byte per sub-object)
(group diagnosis)
Additional bytes
used depending on
the module type,
otherwise 0
Highest sub-object no. 1
Diagnosis of the module The minimum string
(string) length is 1 byte,
up to 5 additional
bytes possible de-
pending on the
module type.
54