The bus coupler address and designation appear in the list.
If the address does not appear in the list:
Reclick on "Search Subnet" or click on "UDP Ping" and enter the following
u
multicast address in the "Device IP address" field: 192.168.100.255.
AVENTICS™ Ethernet POWERLINK | R412018143-BAL-001-AH | English
If the participant still is not found, you must recheck all the previous steps.
Click on the participant in the list.
u
The detailed information appears in the right half. There, you can now adjust the
following settings:
• Change the address of the participant ("local IP Address" field)
• Set the default gateway ("local default Gateway" field)
• Give the device a name or change it ("Device Name" field)
44