Circular Saw Safety Warnings - Rothenberger PIPECUT mini basic Bedienungsanleitung

h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for safe handling and control of the tool in unex-
pected situations.
5) Battery tool use and care
a) Recharge only with the charger specified by the manufacturer. A charger that is suita-
ble for one type of battery pack may create a risk of fire when used with another battery
pack.
b)
WARNING! Use power tools only with specifically designated battery packs
and respectively battery types. Use of any other battery packs may create a risk
of explosions, injury and fire.
c) When battery pack is not in use, keep it away from other metal objects like paper
clips, coins, keys, nails, screws, or other small metal objects that can make a connec-
tion from one terminal to another. Shorting the battery terminals together may cause
burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause irritation or burns.
e) Do not use a damaged or modified battery. Damaged or modified batteries can behave
unexpectedly and lead to fires, explosions or injuries.
f) Do not expose a battery for fire or high temperatures. Fire or temperatures above 130°C
(265°F) can cause an explosion.
g) Follow all the instructions for charging and never charge the battery or the cordless
tool outside the temperature range specified in the operating instructions. Incorrect
charging or charging outside the permitted temperature range can destroy the battery and
increase the fire risk.
6) Service
a) Have your power tool serviced by a qualified repair person using only identical re-
placement parts. This will ensure that the safety of the power tool is maintained.
b) Never service damaged batteries. All maintenance of batteries should only be carried out
by the manufacturer or authorised customer service points.
1.3

Circular Saw Safety Warnings

PIPECUT mini:
Never work without the protection devices stipulated for the respective operating sequence and
do not effect any modifications on the machine that could impair safety.
Protect the machine and the rechargeable batteries from humidity!
Do not throw the rechargeable batteries into a fire!
Remove the rechargeable batteries from the machine before carrying out any setting, retooling,
maintenance or cleaning tasks.
Ensure that the machine is switched off when you push in the rechargeable battery.
Please remove the rechargeable battery from the machine if the machine is put down, transport-
ed or stored unattended.
Clean the machine before placing the machine in the transport packaging.
Make sure that no metal chips come near the battery contacts. These can cause a short circuit.
Make sure that there are no flammable materials nearby. Glowing chips can cause a fire. The
danger area of the chip flight must be kept clear in any case.
The cut edge may be at a higher temperature after the cut, which could result in burns.
Also pay attention to an ergonomic and body-friendly way of working with the recurring use of
larger and heavy profile materials. Handling heavy objects can cause back damage.
Clean the saw system after each work step and when changing materials. Remaining chips can,
depending on the material, lead to a fire.
When processing metals, no suction is to be used, only the chip bag.
ENGLISH 21