Safety Notes; Intended Use; General Power Tool Safety Warnings - Rothenberger PIPECUT mini basic Bedienungsanleitung

1

Safety Notes

1.1

Intended use

PIPECUT mini
The ROTHENBERGER sawing system is only suitable for cross cutting of pipe and profile mate-
rials made of plastics, non-ferrous metals, steel and stainless steel with the help of the pipe
clamping and support device. A freehand cut is excluded for profile materials.
Panel materials such as chip board, core board and medium density fibre board can also be
processed. Use only approved saw blades according to EN 847-1, which are suitable for the re-
spective purpose. The saw system must be cleaned after every change of material.
Any other use than described above is not permissible. The manufacturer cannot be held liable
for any damage arising from such other use.
So as to use the machine as intended, comply with the operating, maintenance and repair in-
structions specified by ROTHENBERGER.
Use only original ROTHENBERGER or CAS (Cordless Alliance System) battery packs and ac-
cessories.
Charger and battery:
The chargers are only suitable for charging ROTHENBERGER and CAS (Cordless Alliance Sys-
tem) battery packs.
This tool is not designed for use by persons with physical, sensory or mental disabilities, or with
insufficient experience and/or knowledge, unless they are supervised by a person responsible
for their safety, or have received instructions on how to use the tool by this person.
Never attempt to charge batteries that are not rechargeable. Danger of explosion!
Battery packs marked with CAS are 100% compatible with CAS devices (Cordless Alliance Sys-
tem). To select the appropriate device, please contact your ROTHENBERGER dealer. Read the
relevant instructions for the devices used.
1.2

General Power Tool Safety Warnings

WARNING! Read all safety warnings, instructions, illustrations and specifica-
tions provided with this power tool.
Failure to follow all instructions listed below may result in electric shock, fire and/or serious inju-
ry.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your electrically-operated (corded) power tool or
battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will in-
crease the risk of electric shock.
ENGLISH 19