Menu Structure; Power Button As Instrument Status Indicator - Actim 1ngeni Bedienungsanleitung

1.4.4 Menu structure

The home menu consists of three sections for the user: test (Section 5), results (Section 7) and settings (Section 3).
In addition to these, the administrator (admin) will have access to the admin settings (Section 4).
TEST
PATIENT TEST
PATIENT TEST (READ ONLY)
CONTROL TEST
INSTRUMENT CHECK
FEATURES MAY BE HIDDEN DEPENDING ON THE ADMIN SETTINGS
Fig 3.
Menu structure

1.4.5 Power button as instrument status indicator

The different power button signals indicate the instrument's status.
Start-up:
Holding down the power button for 1 second will initiate the Actim 1ngeni instrument's start up
sequence. Wait for the instrument boot up sequence to complete, after which the instrument's
application home screen is displayed.
Shutdown:
Once the instrument is powered on and the instrument's application is visible, the instrument is
shutdown when the power button is pressed and held for 3 seconds. The shutdown status bar is
displayed and the instrument is powered off. The instrument will go into a screen saver mode when
left on and not in use.
Rapid flash: Initial power connection registered.
Slow flash: Power connected. Instrument shutdown.
Solid:
Instrument on.
HOME
RESULTS
PATIENT TEST
CONTROL TEST
INSTRUMENT CHECK
SETTINGS
AUDIO
NETWORK
PRINTER SETUP
BRIGHTNESS
ABOUT
HELP
LEGAL
INTRODUCTION
ADMIN
EXPORT
SAVE DIAGNOSTICS
READ ONLY
USERS
INSTRUMENT CHECK
CONTROL TEST
SELF TEST
IMPORT TEST TYPES
LANGUAGES
SET TIME
SET DATE
CHANGE ADMIN
PASSWORD
RETURN TO
FACTORY DEFAULT
7