Network Printer - Actim 1ngeni Bedienungsanleitung

SPECIFICATIONS SUMMARY
Light Source
Roll (Tilt) Tolerance
Pitch Tolerance
Skew (Yaw) Tolerance
Print Contrast Minimum
Operating Temperature
Storage Temperature
Humidity
Drop test
Ambient Light Immunity
ESD Level
Supply Voltage
Operating Current
Idle/Standby
Dimension
Weight
Types
Interface

9.4 Network printer

The Actim 1ngeni instrument will print to a network-connected printer with Printer Postscript Level 3 support.
The printer itself must accept postscript. When this is simply specified as being part of the printer driver, it
may not operate because drivers are not located on the instrument. The use of a monochrome laser printer is
recommended. A range of printers with Postscript Level 3 support have been tested with the instrument. Often
postscript capability is included in printers with network capability, when the printer also has a USB connection.
LED
Up to ±360°
±65°
±60°
25% minimum reflectance
0° to 50°C (32°F to 122°F)
-40° to 70°C (-40°F to 158°F)
0% to 95% relative humidity, non condensing
Scanner withstands 18 drops from 1.5m (5ft)
Up to 86,000 Lux
16 KV
4.5-14.0 V (DC)
140mA (typical)
380mA (max)
50mA (typical)
Height: 163mm (6.4")
Length: 91mm (3.6")
Width: 41mm (1.6")
~ 145g ( ~ 5.1oz) without cable
Code 39, EAN, PDF-417, DataMatrix, QR Code.
RS232, Keyboard Wedge, USB Com Std., USB Keyboard, USB OEM
ACCESSORIES
31