Actim 1ngeni Bedienungsanleitung Seite 41

In-Test Error Dialogs
Error: 86 Normalisation Exception
Warning Dialogs
Are you sure you want to delete user {0}?
0001
This cannot be undone.
Are you sure you wish to change the Admin
0003
password?
Do you wish to change the date to: {0}?
0004 This may affect the status of the instrument
schedulers.
Do you wish to change the time to: {0}?
0005 This may affect the status of the instrument
schedulers.
Import test types package:
{0}
0006
Version = {1}?
Import replaces existing test types.
The control status for this test has failed or
0007 is overdue!
Do you wish to proceed?
Instrument check has failed or is overdue!
0008
Do you wish to proceed?
Reset instrument settings to factory
0009 default?
All current settings and data will be lost.
Instrument memory is almost full!
0010
Please export and delete result data.
Instrument memory is full!
0011
{0} is deleted if you wish to proceed.
Delete all test results from the instrument
0013 memory?
This cannot be undone.
The normalisation failed to complete.
Re-attempt normalisation.
Contact the Manufacturer.
The instrument requires confirmation that the user does
intend to delete the user ID. This step once confirmed
cannot be undone.
The instrument requires confirmation that the admin user
wishes to continue.
The instrument requires confirmation that the user wishes
to change the instrument date. This is required because
changing the instrument date will affect the self test,
instrument check and control test schedules.
The instrument requires confirmation that the user wishes
to change the instrument time. This is required because
changing the instrument time will affect the self test,
instrument check and control test schedules.
A instrument warning informing the user that the Test
Types file they are attempting to install on the Actim 1ngeni
instrument will replace the current test type set.
The instrument is warning the user that the instrument
either; failed its last Control test for that test type or it is due
to for another Control test. The user may proceed with the
test but the test result may be compromised.
The instrument is warning the user that the instrument
either; failed its last instrument check test or it is due to for
another instrument check test. The user may proceed with
the test but the test result may be compromised.
The instrument requires confirmation from the user hat
they wish to remove all user entered data and patient
results from the instrument by returning the instrument to
factory default.
This dialog notifies the user that the Actim 1ngeni
instrument memory is almost full and needs to clear in
the near future. Attach a USB flash memory key to the
instrument and perform Test Result export and confirm the
request to wipe instrument memory.
This dialog will appear until the memory is cleared or the
memory is full.
This dialog notifies the user that the Actim 1ngeni
instrument memory is full and needs to clear before further
testing can be performed.
If you proceed a result will be deleted from the test memory
to make room for the new test result. This cannot be
undone.
Attach a USB flash memory key to the instrument and
perform Test Result export and confirm the request to wipe
instrument memory.
The instrument requests the user to confirm that the user
would like to delete all test results from the instrument.
This cannot be undone
TROUBLESHOOTING
41