Actim 1ngeni Bedienungsanleitung Seite 42

TROUBLESHOOTING
42
Warning Dialogs
Cancel changes?
0014
Changes made will be lost.
Cancel test?
0015
Test data will be lost.
Import list of {0} users?
Imported user list will replace existing
0017
user list.
This cannot be undone.
A remote connection is still active!
0022
Are you sure you wish to cancel?
Save diagnostics substantially increases
0023 memory use!
Do you wish to proceed?
Leaving this page will reset its values.
0025
Are you sure you want to proceed?
0026 Are you sure you wish to proceed?
Errors Dialogs
A critical error has occurred!
0512 Please refer to user manual.
Reboot required.
RTC failure!
0513
Please refer to user manual.
User ID not recognised!
0514
Please try again.
User ID input invalid!
0515 Entry should be between 1 and 20
characters.
Invalid input!
0516 Entry should be between 1 and 20
characters.
User ID already exists!
0517
Please enter a different ID.
This is a instrument warning, advising the users that any
changes made on the current GUI screen will be lost by
navigating away without saving changes.
This is a instrument warning, advising the users that
cancelling the current test will lose the current test data.
This cannot be undone.
The instrument informs the user that importing a new user
list will replace the user list on the instrument. Please make
sure this is what you want to do before proceeding with the
import request.
If the Actim 1ngeni instrument has been used in Connected
mode with the Actim 1ngeni Kinetic Software then it may
find the connection still open. To close the connection,
select "OK"; to keep it open select "Cancel".
The Save diagnostics function on the instrument uses more
memory than a standard test result. Only use this function
for troubleshooting purposes. The instrument warns you
before you turn this function on.
This is an Actim Oy factory user item only.
This is a secondary confirmation requesting the user
confirm that they do indeed wish to return the instrument to
factory default.
The Actim 1ngeni instrument has suffered a critical error.
The instrument will not boot up.
Arrange for the return of the instrument.
The Actim 1ngeni instrument real time clock battery has
failed.
Arrange for the return of the instrument.
The user ID entered does not match an ID entered in the
instrument user ID list.
Please re-attempt user ID entry.
If you have forgotten your user ID, please contact the
administrator.
The text input by the user does not meet the requirements
of being between 1 and 20 alphanumeric characters.
The text input by the user does not meet the requirements
of being between 1 and 20 alphanumeric characters.
The user ID entered already exists on the instrument, please
either:
Enter a different User ID
Delete current user ID
Edit current user ID
! The following user ID are not available on the instrument
"admin", "factory" or "Actim Oy".