Aventics HF03 Betriebsanleitung Seite 64

64 AVENTICS | HF03/HF02 | 1987765493–BDL–001–AB
Installation
Plugs X1, X3, X5, X7
4 and 3-pin
Plugs X2, X4, X6, X8
4 and 3-pin
XUS, 8-pin plug
Undefined switching states
O
Please note that a mixed connection of actuators and
sensors on one terminal (X1/X2 or X3/X4 or X5/X6 or
X7/X8) is not permitted.
This applies independent of the operating mode set.
Table 11: X1, X3, X5, X7 plug pin assignments
Pin Signal
1 I/O 0
2 I/O 1
3 I/O 2
4 I/O 3
24 V US
0 V 0 V
PE PE
Table 12: X2, X4, X6, X8 plug pin assignments
Pin Signal
1 I/O 4
2 I/O 5
3 I/O 6
4 I/O 7
24 V US
0 V 0 V
PE PE
Plug pins XUS, X0V, XPE serve as reserves.
Table 13: XUS plug pin assignments (reserve)
Pin Signal
All 8 US
NOTICE
Assignment
Digital input and/or output, bit 0
Digital input and/or output, bit 1
Digital input and/or output, bit 2
Digital input and/or output, bit 3
Sensor supply
Ground for all voltages
Protective ground
Assignment
Digital input and/or output, bit 4
Digital input and/or output, bit 5
Digital input and/or output, bit 6
Digital input and/or output, bit 7
Sensor supply
Ground for all voltages
Protective ground
Assignment
Sensor supply