Takeuchi TB 175 Handbuch Seite 963

Insert the governor link into the link hole of the pump body.
Fit the link lifter to the installation hole and fasten the bolt.
Pull the governor assembly slightly to check that the link is
engaging securely.
Combine Governor and Pump Bodies
Install the new O-ring to the stop solenoid and assemble them
to the governor case.
Tightening Torque : 7.8-9.8 N-m
nstall a new packing, (governor case cover) to the case.
Install the governor case cover to the case.
This completes reassembly of the pump.
41