Takeuchi TB 175 Handbuch Seite 938

(7) No load max. speed
When the load decreases from full load max. speed
and engine speed further increase, the increased thrust
load of the governor weight acting on the governor
spring through the tension lever exceeds the set load of
the spring, the tension lever and governor lever
descend clockwise, the control rack is pushed to the no
load injection volume position (RH), and the engine is
operated at no load max. Speed.
When the engine is being used at partial load, the
governor spring functions in the same way at a lower
speed (i, i'-j) as for full load max. Speed, as the
governor spring set load is smaller.
(8) Stopping engine
The engine stops when you turn the governor control lever all the way towards stop.
On engine equipped with a stop device, the engine can be stopped by moving the control rack to the stop position,
regardless of the control lever position.
16