Separating Hydraulic Head Cmp; Separating The Cam Shaft - Takeuchi TB 175 Handbuch

3.1.4. Separating hydraulic head CMP

Remove the hydraulic head CMP fixing bolt.
Remove the hydraulic head CMP.
Remove the packing.

3.1.5. Separating the cam shaft

Remove the joint, (distribution shaft).
Remove the feed pump.
Do not loosen two bolts (A)
.
O-ring
Make sure that two O-rings are free from
damages.
Remove the removal stop, (transmission shaft) fastening bolt.
25
A