4. Disassembly, inspection and reassembly of engines
4.4 Cylinder block
4.4.1 Components
Note) This figure shows the 3TNV84.
4.4.2 Disassembly procedure:
Disassemble in the order of the numbers in the illustration.
1)Perform steps 1) to 12) in the cylinder head disassembly procedure.
2)Perform steps 1) to 12) in the gear train disassembly procedure.
3)Remove the oil pan. (See Point 1 of 4.4.4)
4)Remove the lubricating oil suction pipe.
5)Remove the piston w/rod. (See Point 2 of 4.4.4)
6)Remove the mounting flange. (See Point 3 of 4.4.4)
7)Remove the bearing metal caps. (See Point 4 of 4.4.4)
8)Remove the crankshaft. (See Point 5 of 4.4.4)
9)Remove the tappets.
10)Remove the pistons and rings. (See Point 6 of 4.4.4)
11)Remove the oil seal from the mounting flange. (See 4.4.8 of 4.4.4)
4.4.3 Reassembly procedure:
Reverse of the disassembly procedure.
Flywheel
Flywheel hausing
Oil seal
Oil seal case
Oil filter
Bearing cap
Oil pan spacer
Oil pan
Piston ring
Piston & Connecting rod
Gear case flange
Oil suction pipe
90
Tappet
Crankshaft