Servicing Points - Takeuchi TB 175 Handbuch

4. Disassembly, inspection and reassembly of engines

4.2.4 Servicing points

Point1
[Disassemble]
• Loosen the mounting bolt while supporting the alter-
nator.
Do not tilt the alternator toward the cylinder block in
haste since it may damage the alternator or pinch a
finger.
[Reassemble]
• The belt deflection shall be checked according to
2.2.2. in Chapter2.
[Reassemble]
• Replace the belt with a new one if cracked, worn or
damaged.
• Carefully prevent the belt from being smeared with oil
or grease.
Point2
[Reassemble]
• Check the thermostat function. (See3.9 in Chapter 3
for the check procedure.)
Pont3
[Reassemble]
• Replace the fuel filter element with a new one.
[Disassemble]
• Cover the fuel pipe opening with tape to prevent
intrusion of foreign matters.
Point4
[Reassemble]
• Replace the oil filter with a new one.
• After fully tightening the filter manually, retighten it
with a filter wrench (see 11.1-6 in Chapter 11) by 3/4
turn.
Point5
[Disassemble]
• Cover the fuel injection pipe and pump inlets and out-
lets with tape or the like to prevent intrusion of foreign
matters.
Adjuster
Alternator
Tension adjustment
C.W. pump
Crank pulley
72
Adjust the V-belt tension
inserting a bar
98N (10kgf)
Set bolt
Deflection
Alternator
V belt
V-belt tention