Safety Precautions - Takeuchi TB 175 Handbuch

(1) SERVICE AREA

Safety Precautions

•Sufficient
Ventilation
Inhalation of exhaust fumes and dust particles may be hazardous to ones
health. Running engines welding, sanding, painting, and polishing tasks
should be only done in well ventilated areas.
•Safe / Adequate Work Area
The service area should be clean, spacious, level and free from holes in the
floor, to prevent "slip" or "trip and fall" type accidents.
•Bright, Safely Illuminated Area
The work area should be well lit or illuminated in a safe manner. For work in
enclosed or dark areas, a "drop cord" should be utilized. The drop cord must
have a wire cage to prevent bulb breakage and possible ignition of flammable
substances.
•Safety Equipment
Fire extinguisher(s), first aid kit and eye wash / shower station should be
close at hand (or easily accessible) in case of an emergency.