Separating The Governor Weight Cmp; Disassembling The Hydraulic Head - Takeuchi TB 175 Handbuch

3.1.2. Separating the governor weight CMP

Providing whirl-stop to the camshaft
Example of whirl-stop
Remove the nut, (governor support).

3.1.3. Disassembling the hydraulic head

Disassembling the hydraulic head
Remove the joint, (FO inlet pipe).
Disassembling the delivery valve
Remove the holder, (delivery).
Remove the delivery valve and gasket.
Delivery valve parts disassembled. (Take care not
to mix these with other parts on reassembly.
Reassemble these to the original port as a set.)
Remove the delivery valve and gasket.
Remove gasket
23